1. Configuring Helios 2N Door Station for OmniTouch7 Integration

Helios 2N Configuration

1.  Open a browser, enter in the URL for the door station and hit Enter.
2.  Enter in the User Name (default is admin) and Password (default is 2n), and hit Login.

3.  Click on System and then Network.
4.   4.  Set/Enter in the following:

a.      Uncheck DHCP.

b.     Click on/Expand Manual Settings.

c.      Enter in the desired IP Address.

d.     Enter in the Subnet Mask.

e.     Enter in the Default Gateway.

f.       Enter in the Primary (and Secondary, if desired) DNS

g.      Click on Apply.

      5.  Click on Services (purple icon) and then select Phone.
      6.  Enter the following:

a.      Display Name – recommend using the name assigned to the extension created in the SIP server.

b.      Phone Number (ID) – this is the number assigned to the door station in the SIP server.

c.      Domain – enter in the network domain.

d.     Check the box for Registration enabled.

e.      Registrar Address – this is the IP Address for the SIP server

f.       Registrar Port – you can use the default value (5060).

g.      Click on the Video tab and insure that Codec 1 is set to H.264

h.      Click on Apply.


7. While still on the Services tab, go to HTTP API and make the following changes:
            a.   Set the Connection Type for Camera API to "Unsecure (TCP)" and the Authentication to None.
            b.   If the relay on the 2N will be used (must have license to use this feature), set the Switch API to "Unsecure (TCP)" and set the Authentication to None. For additional information on this application, please review Knowledgebas Article ID 1329.

8.  Click on Directory (blue icon) and select Users.
9.  Enter in the following:

a.      User Basic Information>>Name – Enter in the name of the door station set in the SIP server.

b.     User Phone Numbers>>Number 1>>Phone Number – enter in the number for the “Ring Group Extension” created in the SIP server.

c.      Click on Apply.

1.1. Utilizing the relay on a 2N Helios IP Vario


This application note demonstrates how to setup and configure the built-in relay on a Helios 2N door station for use from an OmniTouch 7 while on a call.  For the purposes of this demonstration, Leviton used the Helios 2N Vario.

This application note covers only the setup and configuration of the relay in the 2N.  Refer to Knowledgebase Article ID 1310 for additional details on configuring a 2N to work with an OmniTouch 7.  Note: In order to use the built-in relay, a license for the 2N must be purchased.


I     In the 2N settings, navigate to Services (purple box) > HTTP API > Services Tab. Ensure that the switch API is enabled, connection type is set to Unsecure, and None is selected for Authentication.


N   Next, navigate to Hardware (gray box) > Swicthes > Switch Tab (it can be any of the 4 swicth tabs). Set the Swicth Mode to Monostable and set its duration to the desired timeframe in seconds. For Controlled Output, set the relay you wish to trigger.


Go to SIP Stations in PC Access and find the station you wish to control. For the Activate Swicth field, select the number that matches the Switch Tab’s number you configured in step 2 (see below).


S    Save the configuration, write the settings to your controller, and reboot all touchscreens.  Try making a call from the door station, answer from one of the touchscreens, and you should see an Activate button on the call screen. Pressing it should trigger the door station’s relay.