Most Popular Articles
Most Helpful Topics
HAI Lighting Control
Gen III UPB Features and Improvements
Can Gen III HLC products be identified by their firmware version?
How can I determine if I have Gen1 or Gen2 HLC products?
Can I determine the firmware version of an HLC product without using UPStart software?
Can HLC products control CFL and LED lighting?
Applying HAI Lighting Control (HLC)
Using UPB Lighting Format
Identifying 3-Way Lighting Applications
Using Upstart Software
Phase Coupler Type
Phase Coupler Current Draw
Why does my lighting stop working after using Upstart software?
Lamp Module Configuration Fails
Basic UPB/HLC Troubleshooting
General Link Assignments
Using a Scene Switch to Control 4 Individual Loads
Using a House Status Switch to Control Individual Light Loads
How are Links assigned to an 8-button House Status Switches in an HAI Lighting Control environment?
Can I get LED Status Tracking on a House Status Switch in a "stand-a-lone" application?
Creating a routine to flash all lights during an alarm. Note: not needed for HLC systems in 2.15 or higher firmware controllers.
Flashing Lights for Hearing Impaired - This would apply to HLC systems with 2.14 or earlier firmware.
Can I change the default scenes in the Leviton Scene Switch (6-button) without having to write/change lines of programming, or using the Upstart software?
Can I change one of the default room scenes from an OmniTouch, without using PC Access or UPStart?
Can I configure non-HLC products to work like the HAI Lighting Control Scheme?
What switches are used in 3-way applications where the load exceeds 600W?
1500 Watt Dimmer Rating
Scene Switch IR Control
Scene Switch Remote Codes
Article ID: 486
© 2016 Leviton Manufacturing Co., Inc. All rights reserved.
Powered By: NovoSolutions, Inc.