AC Fail does not report to Central
Station and no dial out. Will dial out for other alarms but not AC Fail. Does
show in event log as AC Fail.
Check AC Fail Report Time is not set
to 0 in DCM
AC failures are detected and reported
on the consoles after 3 minutes, so a report time of 1 minute would dial the
central station 4 minutes (3 + 1) after the actual power failure. The default
value of 60 minutes means that
the central station will not be notified unless the power failure lasts for 63 minutes.
Check DCM Type, ONLY Contact ID will
dialout and report AC Fail to Central Station .