the Leviton INDS1 Door Station for Intercom Applications
This application note provides details on configuring
the Leviton INDS1 Door Station to be used in intercom applications with OmniTouch 7 touchscreens and a SIP server.
OmniTouch 7 Touchscreen using Firmware Version 1.14 or higher with Kernel 1.2 or higher.
4. -Compatible SIP Server (Epygi QX IP PBX or Zycoo
Open a browser and enter
the IP address from the SIP Station
to connect to the door station.
Enter in the User Name (default is admin) and Password (default is admin), and press
Information page is displayed, which gives Device Information, Network,
and SIP Phone Information.
To configure the network settings, select Network from the main menu, and then
select Network from the context
To select a static IP address (recommended), select Static from the Type drop down menu. Enter the desired static IP address, Subnet Mask, Gateway, Primary DNS and Secondary DNS for the local network.
When complete, click Save.
Configure SIP Settings to Make and Receive Calls:
To configure the SIP settings of the Leviton
Door Station, select Phone from the
main menu, and then select SIP from
the context menu.
Set/Enter in the following:
/ P2P Bridge: enter the IP address
of the SIP Server.
Service Domain: enter the IP address of the SIP Server.
Name: enter the name of the door station as it will be displayed on the
Name & Phone Number: enter the SIP Registration Username previously
assigned to the door station in the SIP Server IP Line Settings. CRITICAL NOTE: The
Authentication Name is “only” required when using the Epygi SIP Server – no
Authentication Name is required for a Zycoo SIP Server.
enter the SIP Registration Password previously assigned to the door station in
the SIP Server IP Line Settings.
Configure Outgoing Call Settings:
Click on Phone
and then select Outgoing call.
Dial #: enter the extension number in the SIP server for the number to be
called from the door station when the call button is pressed. The extension
will most likely be assigned to a Ring Group in the SIP server to ring several
extensions, including phones and the OmniTouch 7.
Configure the Leviton Door Station Relay:
- Click on System and then select Digital Control.
command: enter a key sequence that will be used to unlock the door when
calling from a phone.