Yes. An Omni Pro II or Lumina Pro automation controller (not supported on the Omni LT, Omni II, Omni IIe, Lumina or older Omni series controllers) with firmware version 3.5 or later can be interfaced to a Carrier Infinity or Bryant Evolution HVAC system, to provide two-way support.
The Leviton controller can change setpoints, operating modes, and monitor changes in these items and current room temperatures.
Each Carrier/Bryant HVAC zone appears as a standard Leviton thermostat and may be controlled as though it was a standard Leviton thermostat.
The application note is available upon request from the Leviton Technical Support at SAsupport@leviton.com
|